Monday, 30 November 2015

Container Volumes and Terminal Capacity in North Europe II

Dynamar has recently issued “Container Volumes and Terminal Capacity in North Europe II”, the latest report in its Ports and Terminals series.
Main container trades, ports and terminals
Europe-Far East and Transatlantic are the two major trades connecting with North Europe. The services of the eighteen carriers operating in these two trades call at seventeen ports in the Gothenburg-Sines range. In 2014, these ports had a total throughput of 53 million TEU, +5% year-on-year. As matters are, volumes will be lower this year.
These seventeen ports comprise 55 container terminals equipped with ship-to-shore gantries. As of the end of 2014, they had a combined handling capacity of 86 million TEU. The resulting 62% occupancy may seem to run counter to congestion having plagued so many ports.
The main reason for this congestion phenomenon was and is that demand doesn’t come in nice regular volumes to be discharged and loaded every day. Even the largest ships remain prone to the elements, sometimes causing havoc to schedule integrity. Delayed ships may bunch up in their next North European port, which will work through further in their schedule.
Growing vessel sizes
At the start of this century world’s largest box ship was a 8,200 TEU Maersk vessel. Last April, a ship with nearly 2.5 times that capacity was delivered: UASC’s 19,900 TEU “Barzan”. The number of +18,000 TEU leviathans will swell to well over 110 by 2019.
6,000 moves per day
Considering their call sizes, the consensus among big ship carriers is that terminals should handle 6,000 moves a day on a ULCS; stevedores rather see 3,500 moves as a more realistic maximum. ULCS is the generic name for container ships larger than 10,000 TEU.
While the 347-metre 8,200 TEU ship could be handled with seven ship-to-shore container gantries, the 400-metre long, though much wider 18,000+ TEU design can be worked with 9 quay cranes at the max. The latter’s spreaders do have to travel longer, i.e. wider and deeper. Tandem-spreaders will be used whenever possible and the cranes need to be taller, minimum 50 metres under the spreader. Thus, they are heavier: some 2,000 tons and therefore require stronger quays, along 17 to 18 metres water depth.
Purpose built
Until recently, just four container terminals in North Europe were purpose-built for the handling of Ultra Large Container Ships, including the current largest afloat:
  • EUROGATE Container Terminal Wilhelmshaven/Germany, on 18 metres deep water

  • Hutchison’s Berths 8/9 Terminal in Felixstowe/UK - 16/18 metres

  • ECT’s Euromax at Maasvlakte 1 in Rotterdam - 20 metres

  • DP World’s London Gateway in London/UK - 17 metres (not yet structurally handling the big ships)

New 2015 facilities
This year, three more tailor-made ULCS facilities have been or will be launched:
  • April: APM Terminal Rotterdam II at reclaimed Maasvlakte 2. Fully automated including the novelty of (eight) remotely controlled StS gantry cranes with an outreach of 24 boxes wide
  • September: DP World’s Rotterdam World Gateway (RWG), same area, fully automated and remotely controlled too: all 14 quay cranes, i.e. including the three barge gantries
  • December: Liverpool2 Container Terminal, semi-automated yard with initially five conventionally operated ship-to-shore gantries
Automation, the holy grail
Full quay crane automation is seen as the only way to achieve 6,000 quay-side moves per 24 hours. Unlike the traditional human crane-driver, a robot crane doesn’t suffer from back or neck stress, fatigue or fading concentration and can easily withstand the required faster acceleration and braking.
Both APM Terminal II and RWG Rotterdam expect an ultimate production of 6,000 moves per day working the ULCS with 6 automated quay cranes, once their almost excessive degree of automation has been fine tuned, which may take a while…
Gate pressures
6,000 moves per 24 hours: the vast majority of all the corresponding around 11,000 TEU have to be delivered to the consignee, or to be taken to the terminal by the shipper. Superior connecting infrastructure will be key. Apart from expanding yard space and equipment, it will be required to start the delivery of inbound boxes while the vessel is discharging. A fast quay crane production puts tremendous pressure on the terminal’s storage capacity.
Existing 2014 North Europe Container Terminal capacity (of ports handling Far East and North America shipping services)
2014(Port) 2014
Europe North West
Europe Atlantic
Grand total
TEU *1 million
(Source: “CONTAINER VOLUMES & TERMINAL CAPACITY in North Europe II”, published by Dynamar B.V.)
Note: a free contents overview of “CONTAINER VOLUMES & TERMINAL CAPACITY in North Europe II”, including more on the above issues can be downloaded at
About Dynamar:
Since 1981, Dynamar B.V. of Alkmaar, the Netherlands, has provided Transport and Shipping Information and Consultancy services for the Marine, Energy and Financial sectors. Dynamar today is world's leading container sector credit risk analyst, a major provider of analytical container shipping news and commentary, and a regular supplier of bespoke liner shipping consultancy services.
Dynamar B.V., P.O. Box 440, 1800 AK ALKMAAR, The Netherlands
Phone +31 72 514 7400 - fax +31 72 515 1397 - email - Web
By Dirk Visser, Senior Shipping Consultant, Managing Editor DynaLiners, November 27 2015

ClassNK released draft amendments as consequence of MOL Comfort loss (Videos)

ClassNK released draft amendments as consequence of Mol Comfort loss (Videos)

By ,  ,  Curious

Two-and-a-half years after the containership MOL Comfort split in half, burst into flames and sank, ClassNK, a committee which is made up of representatives from the shipping and shipbuilding industries as well as scholars and experts to discuss matters relating to the establishment and revision of technical rules and guidance, has released its draft amendments to its containership structural requirements.

The new requirements are scheduled to apply to container ships contracted for construction on or after 1 April 2016.
The amendments are based on the International Association of Classification Societies (IACS) Unified Requirements S11A (‘Longitudinal strength standard for container ships’) and S34 (‘Functional requirements on load cases for strength assessment of container ships by finite element analysis’) as well as reports from Japan’sMinistry of Land, Infrastructure, Transport and Tourism (MLIT), and ClassNK’s own report released in September 2014.
The amendments were approved by the ClassNK Technical Committee in Tokyo on Nov 19, 2015.
In response to the ship loss, ClassNK established the "Investigative Panel on Large Container Ship Safety", which comprised of shipbuilders, shipping companies and people with relevant knowledge and experience, to investigate the possibility of casualty occurrence and the structural safety of large container carriers.
The results from the investigation and ClassNK’s action plan were released in the Investigation Report on Structural Safety of Large Container Ships in September 2014.
The MOL Comfort is considering the biggest containership loss in history. The 8,000 TEU containership was sank after breaking in two in the Indian Ocean in June 2013.
The videos below are taped by crewmembers of vessels dispatched to the incident site, showing MOL Comfort' crack and taking on water:
The draft amendments were approved by the ClassNk Technical Committee in Tokyo on November 19th and will come into effect after approval from ClassNK’s Board of Directors.

Watch: DFDS ferry blown from its North Shields moorings as high winds batter the North East

DFDS ferry blown from its North Shields moorings as high winds batter the North East

By ,  ,  Accidents

The DFD Seaways ferry was swept adrift in the River Tyne in North Shields, Tyneside, as it was being prepared to sail to Ijmuiden, near Amsterdam on Sunday afternoon (Nov 29).

Ferry passengers have been warned of possible delays after a ship broke free of its moorings in North Shields .

Residents heard a loud bang as high winds battered the North East before the DFDS Seaways vessel, Princess Seaway, could be seen adrift in the Tyne.
As winds of up to 65 mph hit the North East there were delays across the travel network and the vessel was around one hour 45 minutes late arriving into port.
A Port of Tyne spokeswoman confirmed the vessel had broken free from its moorings but said she was unable to confirm further details.
Brian Hall, of Commissioner’s Wharf, North Shields , witnessed the ship break from its moorings. He said:
“There was a large bang and I looked out and saw the Princess Seaways ferry being pushed across the river. It is breached across the river and it looks as if it could be damaged. From the house it looked like there was some damage at the rear. A small dredger was on the river and it tried to push the ferry back into position but it didn’t have much success.”
The 61-year-old, who has lived at Commissioner’s Wharf for two-and-a-half years, said it was the first time he’d seen a ferry struggling against such high winds.
Max Foster, passenger director at DFDS said:
“Unfortunately, I can confirm that the ropes securing Princess Seaways to the berth at the Port of Tyne in North Shields snapped in the high winds...I would like to apologise to our passengers for any inconvenience caused to their journeys, but we, like many other travel operators, are sometimes beholden to the weather. Passenger safety is of paramount importance to us and we will not sail unless we believe it is safe to do so”
In February 2008 ferries between North Shields and Ijmuiden were cancelled for a week for essential repairs after the DFDS vessel King of Seaways was blown from its moorings and collided with an oil platform.

Sunday, 29 November 2015

Container Accident Compilation #2 !! Fails + Accidents + Lucky + Funny MUST SEE!!

Townsend-Thoresen / ASN / P&O Ferries Felixstowe

Credit for the above pics go to Kevin Lewis

How many Felixstowe Dockers worked on this terminal and had some good times.

And here is the end of ASN

And now we have…...

Saturday, 28 November 2015

Maersk Values: Soren Skou

A video released recently by Maersk shows the values that are most important to Soren Skou, CEO of Maersk’s shipping arm, Maersk Line.

Skou articulates the importance of nurturing employees and that the quality of the people and the way the company is run are two of the factors that will determine the success of Maersk’s future.
At present, Mr Skou leads a global team of 30,000 people across a total of 120 countries. More than 7,000 of these employees are at sea while the more than 22,000 are based onshore.

(Source: Maersk / YouTube)