Coordinated action to mitigate the effect of a hard Brexit around the port of Rotterdam

Posted by





The Port of Rotterdam Authority, the Municipality of Rotterdam, the Municipality of Vlaardingen and highways authority Rijkswaterstaat (Directorate-General for Public Works and Water Management), are creating five new buffer parking sites. Trucks will be able to wait here temporarily if their customs documents have not been properly prepared for maritime crossings to the United Kingdom (UK), in the event of the country leaving the European Union on 29 March 2019.

The aim of the coordinated action is to minimise any extra delay resulting from additional customs formalities at ferry and shortsea terminals and to ensure freight traffic to the UK runs as smoothly as possible. After all, additional customs formalities are required for so-called third countries. Additionally, more intensive passport checks and inspections by the Netherlands Food and Consumer Product Safety Authority could mean longer processing times at terminals.
The temporary buffer parking sites are marked out on the map. In the unlikely event of this additional capacity being insufficient, the organisations have additional overflow areas in reserve. Moreover, Rijkswaterstaat has been discussing traffic control plans with all parties to make sure it flows efficiently.
Of the approximately 54 million tonnes of freight that is traded annually between the UK and the Netherlands, around 40 million tonnes passes through the port of Rotterdam, and in particular via ferry and shortsea crossings. As soon as Brexit is a fact, the Dutch sea ports will form an outer border between the EU and the UK and this will have major consequences, in particular for the processing of customs papers and passport control.

Simulation

The Port of Rotterdam Authority and the ferry terminals in Rotterdam jointly arranged for a simulation study to be conducted into the effects of Brexit on the processing of freight traffic at and on the approach to the terminals. Based on historical data, it can be assumed that approximately 400 trucks will not have their formalities in order. The results of this simulation study have allowed a substantiated estimate of the required number of temporary buffer parking places for heavy goods vehicles to be made. The figures mean the authorities can expect that the 700 additional spaces provided at buffer parking sites will be sufficient.

Northern bank buffer parking sites

On the northern bank in Hoek van Holland, the Municipality of Rotterdam has allocated the Oranjeheuvel site. This site is close to the ferry terminal in Hoek van Holland. Rijkswaterstaat is creating space there for around 200 trucks. In Maasdijk, in the municipality of Westland, Rijkswaterstaat has created a buffer site for around 50 trucks. In the municipality of Vlaardingen, a site is being created on Waterleidingstraat for around 80 trucks.

Southern bank buffer parking sites

On the southern bank, buffer parking sites are being created on Moezelweg and Seattleweg by order of the Port of Rotterdam Authority. The site on Moezelweg will provide space for approximately 290 trucks. This site is in the vicinity of the ferry and shortsea terminals that operate out of the Europoort port area. The site on Seattleweg will provide space for approximately 80 trucks. Both sites can easily be reached from the A15 motorway, from both the easterly and westerly directions.

Temporary reception area

The buffer parking sites are only accessible to trucks that have not been given access to the ferry terminals in the port of Rotterdam because the Portbase system has not received prior notification of their cargo. Truck drivers can use these locations to liaise with their client or transport planner and make sure the necessary formalities can yet be completed.

Portbase prevents delay through Dutch ports

The Port Authority, the Municipality of Rotterdam and Rijkswaterstaat are advising exporters, hauliers and shippers to use Portbase to provide digital notification of their cargo that is destined for the UK. Using this Dutch supply chain solution for Brexit, cargo can pass quickly and without unnecessary delay through customs to and from the UK, even after Brexit.
For more information, please contact:


As Brexit comes closer and closer, the Port of Zeebrugge presents a solution to ease the flow of cargo to and from the UK, despite the additional fees which will be implemented after the Brexit deadline. The Belgian port is suggesting two tools to face the upcoming Brexit storm.
The development of the RX/SeaPort data sharing platform is an initiative of the Zeebrugge port authority and APZI, the Association of Port of Zeebrugge interests. It is a platform which offers a digital connection between all links in the logistical chain.
“After March 29, the platform ensures a minimization of the Brexit impact, by improving the operational efficiency and creating more transparency in the logistical chain.” Wim Fossaert, Commercial Director RX/SeaPort.
The port of Zeebrugge is the centre of excellence for British distribution in Northwestern Europe. Every week more than 70 regular shipping services connect Zeebrugge to UK regions, according to the announcement of the port.
“RX/SeaPort guarantees a chainwide solution for cargo shipped from and to the UK quickly and efficiently. Ferry and shortsea traffic will experience new customs regulations after Brexit. If these are handled digitally and efficiently, we will avoid problems.” Joachim Coens, Gedelegeerd bestuurder MBZ.
The tools:
WIZARD Export & Import
Supported by the RX/SeaPort, WIZARD offers the illustration of each phase of the logistical process. All the phases of the imports and exports, including booking & pre-announcement, customs declaration, guidelines and procedures for departure and arrival at the terminal, will be visible through WIZARD.
E-DESK FERRY
The second tool focuses on ferry transportations. Terminal operators can be notified, through the system, of their cargo arrival. The data is continuously available and will aid to prevent long waiting periods.
 “After months of preparation with all the stakeholders, we are very happy to present the first tools of RX/SeaPort to process the UK-cargo digitally after Brexit. This is an optimization of the logistical chain in Zeebrugge and will result in a seamless flow of traffic and cargo.” Marc Adriansens, voorzitter APZI
According to the announcement of the Port of Zeebrugge, RX/SeaPort is a digital platform for logistical companies, terminals, shipping lines and government institutes such as customs and port authorities.

Source: Port of Zeebrugge

https://container-news.com/how-zeebrugge-prepares-brexit-storm/

Comments

Post a Comment