Lase, a specialist in laser-based sensor applications for the shipping industry, has achieved a new milestone in its load collision prevention system product development after meeting performance levels for safety standards and receiving certification by the German Employers' Liability Insurance Association.
The LaseLCPS-3D-2D has been qualified for Performance Level D - Category 3, EN ISO 13849-1, proving its reliability as a control system that complies with safety functions.
By reaching one of the highest parameters, the application LaseLCPS-3D-2D confirms its high development status and also the acceptance on the market as a reliable protection against malfunctions.
View LASE Industrielle Lasertechnik GmbH in the PTI Supplier Directory
This specific version of the LaseLCPS-3D-2D application is a combined 3D/2D laser measurement system consisting of each one 2D- and one 3D- laser scanner mounted under the trolley.
The LaseLCPS application software collects the scan data, does all needed calculations and sends the results to the machine programmable logic controller.
In order to measure all relevant stacks, a 3D profile scan in gantry and trolley direction will be processed before the first move. The scan planes of the 2D- and 3D laser scanner are projected orthogonally to each other.
The laser scanners scan over the yard during the movement in order to measure into shadow areas, which have been covered by higher stacks in front before.
Within this collision prevention check, a dynamic surveillance cube around the load proves an overlap with the container profiles in the yard. In the event of an overlap, the system retard the movement by slowing down the crane travel and finally stops the container move.
The system also has a soft-landing function for gentle container handling that leads to less spreader wear and a reduction of the operation noise. View the video below for more information on the LaseLCPS-3D-2D:
First Image: Mounting example for LaseLCPS-3D-2D / © LASE
Second Image: LaseLCPS-3D-2D - Screenshot software interface - green lines indicate surveillance cube around load / © LASE
Second Image: LaseLCPS-3D-2D - Screenshot software interface - green lines indicate surveillance cube around load / © LASE
Comments
Post a Comment