Limited Data Put Svendborg Maersk in Dire Straits


Limited Data Put Svendborg Maersk in Dire Straits

The Danish Maritime Accident Investigation Board (DMAIB) has prepared a marine accident report shedding light on the circumstances that led to Svendborg Maersk container ship accident at Biscay Bay, on February 14, 2014.


The Danish container ship Svendborg Maersk departed from Rotterdam, the Netherlands. The ship was bound for the Suez Canal, and subsequently the Far East. The master expected to encounter adverse weather conditions on the route. However, the forecast did not give rise to concern.
The following day, as the ship had left the English Channel, the weather conditions started deteriorating. In the afternoon, the ship suddenly and without warning rolled to extreme angles and a large number of containers fell over board.
In the early evening, the ship again suddenly rolled violently, reaching an extreme angle of roll of 41° to port. Again a large number of containers were lost over board and, now, the master considered the situation to threaten the safety of the ship. The master sounded the general alarm to muster the crew members. Later in the evening he assessed that the weather no longer posed an immediate danger to the ship.
The accident happened when Svendborg Maersk, on two separate occasions, encountered extremities in an adverse weather situation in the northern part of the Bay of Biscay. The extremities caused sudden heavy rolling of the ship that led to the loss of 517 cargo containers and dam-age to approximately 250 cargo containers.
Limited Data Put Svendborg Maersk in Dire Straits
The report states that a number of factors coincided and caused the incidents and subsequent consequences.
An adverse weather situation was forecasted in SPOS and the ship had prepared for this. However, the weather as a combination of dynamic forces and the extremities encountered by Svendborg Maersk was not expected by the master and crew members, according to the report.
It was inherently challenging, beforehand, by the means available, to gain a mental overview depicting the exact weather and wave situation the ship encountered during the incidents, including the ship’s motional behaviour, as many variables were involved.
Limited Data Put Svendborg Maersk in Dire StraitsThe master’s decision-making prior to the heavy weather navigation was largely reliant on his personal experience with heavy weather and the ship he commanded, says in the report.
Decision-making was challenged during uncertain and dynamic conditions with limited data at hand, or a limited recognition of their meaning in combination with the generic SMS procedures available, that will inherently have a deviance in work as described and how work is carried out, which provided poor decision-making support for the master. The quality of the master’s decisions would therefore only be obvious afterwards, when the outcome was known, DMAIB concludes in the report.
Source: DMAIB; September 08, 2014; Images: Maersk Line/AS

In this video, the OOCL Belgium is shown rolling more than 40 degrees!

Comments

  1. I wonder how many stacks went overboard when a ship would not leave the quay until all bridge fittings had been completed before sailing ?

    ReplyDelete
  2. Bridge Fittings mess with productivity so we will never see those again.

    ReplyDelete
  3. Would be interesting to hear from the governing bodies as to why bridge fittings are not used on these mega stacks, when we had to fit them on vessels only two/three/four/five high from the hatch. Surely the lashing bridge design alone is not enough to eliminate them from the cargo sercuring plan that has to be approved by classification societies, surely not just because of productivity !

    ReplyDelete
    Replies
    1. Profit is priority / next is productivity / share holders next. The biggest problem facing the container world is that Health and Safety thing and paying skilled Port workers a good wage for the dangerous / unsocial hours that they work.

      Delete

  4. The prospect of exhibiting at a trade fair or industry event is exciting for many businesses, especially those that are undertaking such an endeavour for the first time. With that said, there are a few negatives to go along with the many advantages of attending these kinds of events, and care should be taken to identify these so they can be dealt with as effectively as possible.See more at- Messestande, Svendborg

    ReplyDelete
  5. A properly designed exhibition stand will make a bold statement about your organization and invite people to see what you and your business are all about.See more- Messestande, Svendborg




    ReplyDelete

  6. The prospect of exhibiting at a trade fair or industry event is exciting for many businesses, especially those that are undertaking such an endeavour for the first time. With that said, there are a few negatives to go along with the many advantages of attending these kinds of events,
    and care should be taken to identify these so they can be dealt with as effectively as possible.See more at- Messestande, Svendborg

    ReplyDelete

Post a Comment